6 通道射频遥控器采用 CC2500 射频收发器模块和 microchip 的 PIC16F1847 微控制器设计。发射器配有 6 个轻触开关、4 个...
函数信号产生器中的6通道输入混合器
接线图
2023年10月21日 14:13 166
admin
The mixer circuit below has 3 line inputs and 3 mic inputs. The mic inputs are suitable for low impedance 200-1000R dynamic microphones. An ECM or condenser mic can also be used, but muST have bias applied via a series resistor. As with any mixer circuit, a slight loss is always introduced. The final summing amplifier has a gain of 2 or 6dB to overCOMe this. The Input line level should be around 200mV RMS. The mic inputs are amplified about 100 TIMES or by 40dB, the total gain with the mixer is 46dB. The mic input is designed for microphones with outputs of about 2mV RMS at 1 meter. Most microphones meet this standard.
相关文章
发表评论