这个放大器具有八个可选的数字化输入。...
2023-01-30 255 放大器
高稳参考电压电路...
2023-01-30 201 电源 电路
霍尔开与MOS电路连接输出接口电路图...
2023-01-30 279 霍尔 接口 电路图
电路说明:电路应用于观察光脉冲,通过激光脉冲透射后,由厚的试样产生。激光源产生的脉冲并且通过使用视频放大器LM733放大。比较器LM710参考电平设置为1V,为单稳多谐振荡器74121提供必要的触发脉...
2023-01-30 334 光电
该电路使用驱动型转换器,其中信号源是简单的双晶体管振荡器Q1-Q2。导通延迟技术消除重叠电流,否则当一个存储状态,其他的还在被驱动,电流在2N1016推挽功率晶体管Q5和Q6里流动。 &n...
2023-01-30 270 转换器 信号源 晶体管
运算放大器和定时器一起转换输入电压水平到脉冲输出的宽度,并且带有优于1%的精确。输出的频率与输入是相同的。--赛格尼公司桑尼维尔,CA,1977年,P726-727。...
2023-01-30 294 运算放大器 定时器 转换输入
800T机械压力机1300T油压机3200T液压机...
2023-01-30 237 压力机
EL7516是一款升压芯片,工作于1.2MHz定频PWM模式下,内置1.5A、200mΩ的MOSFET。电中路,通过DC/DC升压作用,EL7516将2.7~5.5V输入电压变换为12V的恒定输...
2023-01-30 309 芯片 MOSFET 控制芯片
由UZZ9000和KMZ41构成的电压输出式角度检测电路如图所示,它采用+5V电源,RP1~RP2为失调电压调节电位器,RP3~RP4为增益调节电位器。R为输出端的下拉电阻。输出电压可送至数字电压表,...
2023-01-30 245 检测 电路图
在该电路中,Vin表示电源的输入电压,输入电压范围为2.7~5.5V;Vref是内部基准电压;输入“H”信号时LED开始发光,输入“L”信号时LED熄灭。在RSET端外设有产生恒定电流的电阻。V...
2023-01-30 221 电源 led 变换器