射频功率控制器的工作原理如图所示。控制对象可以是功率放大器(PA 、可变增益放大器(VGA 、可变电压衰减器(VVA 等。选择控制模式时,要将USET、UOUT引脚互相断开。被测射频功率信号通过定向...
2023-01-30 256 控制器
设置12v电池的输出到电压,这个电压是PLL需要的,比如NE561就是PLL。使用900赫兹的正弦波振荡器和LM380N AF放大器来驱动语音线圈边。这个语音线圈有一个500欧姆到3.2欧姆的标准。输...
2023-01-30 311 电池 振荡器 放大器
如图所示,由EEPROM24C256和日历时钟芯片PCF8563组成。24C256是一款低电压、串行接口,容量为256K的存储器,用于存储测量的血压值。PCF8563是PHILIPS公司推出的一款工业...
2023-01-30 589 日历 接口 电路图
发光二极管升压器电路...
2023-01-30 262 发光二极管 升压器 电路
如图是桥式传感器的驱动电路。电路中,A1为恒流输出电路,恒流值由UZ(VD1的稳电压 和(R(RP1 +R2 决定,它为桥式传感器(由RA一RD构成的桥式电路 提供恒流偏置。由A2一A4构成仪用放大器...
2023-01-30 391 传感器 电路图
当同时产生2兆赫的信号,负输出电压线性追踪直流输入电压的时候,该电路用于从正极电源电压得出负极电源电压,但是幅度是大约低于3V。电流不提供调节。—“赛格尼模拟数据手册” 赛格尼公司,桑尼维尔,加利福尼...
2023-01-30 260 电源 电路
光电隔离器电路原理图...
2023-01-30 268 光电 隔离器
交流电压计很容易做。该电路具有简单和组成元件数量少使得该电路尤其具有吸引力。调节器输出是一个来自引脚4的交流输入全波整流信号。引脚5的整流信号上的直流元件和引脚4的有效值输入的线性发生变化。...
2023-01-30 226 电源 电路
如图所示一个运算放大器可以作为增益放大器,通过连接它的输出和反相输入。R1的应足够低,这样的偏置电流运算放大器才不会产生一个明显的补偿。...
2023-01-30 264 放大器
应急灯/闪光灯电路...
2023-01-30 299 应急灯 闪光电路