两个接触器控制的自耦变压器降压起动控制线路 自耦变压器降压起动的方法是指利用自耦变压器来降低电动机起动电压、限制起动电流的一种三相鼠笼式异步电动机的起动方法。电动机起动时,使电动机定子绕组和自耦变压器...
2023-01-25 277 控制线路
两个接触器控制的自耦变压器降压起动控制线路 自耦变压器降压起动的方法是指利用自耦变压器来降低电动机起动电压、限制起动电流的一种三相鼠笼式异步电动机的起动方法。电动机起动时,使电动机定子绕组和自耦变压器...
2023-01-25 277 控制线路
由两只晶体管构成的过电压保护电气控制线路。该线路可以与各种电器设备配套使用,或设置于需要进行过电压保护的设备中。用于对市电的交流220V电源进行监测,一旦该电压升高到240V左右时,就会启动工作,...
2023-01-25 236 过电压
电流原则控制绕线式异步电动机转子串电阻起动控制线路 三相绕线式异步电动机的转子中有三相绕组,可以通过滑环串接外接电阻或频敏变阻器,实现降压起动。按照起动过程中转子串接装置的不同,分为串电阻起动和串频敏...
2023-01-25 205 控制线路
实现点动和长动的控制线路 当有的生产机械需要正常的连续运行即长动外,进行调整工作时还需要进行点动控制,这就要求控制线路既能实现长动还能实现点动,图3.4列出了几种典型控制线路。 (...
2023-01-25 228 控制线路
双重互锁得正反转控制线路和自动往复控制线路 图3.6 双重互锁得正反转控制线路 图3.7 自动往复控制线路 复合按钮也具有互锁功能,如图3.6所示电路是在如图3.5(c)的基础...
2023-01-25 281 控制线路
定子串电阻降压起动控制线路 图3.8所试电路中,通电后,按下起动按钮SB2,接触器KM1通电并自锁,电动机定子绕组串入电阻R进行降压起动。经一段时间延时后,时间继电器KT的常开延时触点闭合,接触器K...
2023-01-25 299 定子
自动控制的双速电动机控制线路 如图3.18所示自动控制的双速电动机控制线路中,由时间继电器KT完成从低速起动,自动地转为高速运行的过程。本电路只允许低速起动和高速运行,而无法低速运行,也无法高速起动...
2023-01-25 297 控制线路