应该根据电动机铭牌标注的接线方式来接,比如说励磁绕组单独分开的要单独接,然后再联接电枢绕组。启动时应先启动励磁后启动电枢,对于串激式直流电机,只要将电压极性接对了就行,若反转调换一下正负极就可以的。...
-
GaN 基 PFC 提高 HVAC 热泵效率
供暖、通风和空调 (HVAC 系统提供舒适的室内生活和工作...
- 两线制接近开关的特点及基本接线图
- 双电源自动切换开关工作原理接线图和操作规范
- PLC控制系统输出回路接线的优化
- 电流互感器接线方法与方式
-
双联开关接线图详解
双联开关接线图双联开关接线图双联开关接线图【实战问题】 家用...
- 用于汽车 48 V 配电的双向 DC-DC 转换器的设计
- 使用 AD654 的步进控制器脉冲发生器
- LED驱动器
- 50V – 5A 直流有刷电机驱动器
-
两线制接近开关的特点及基本接线图
1.两线的接近开关能够感应金属或非金属的接近,具有接线无极性...
- 交流接触器接线图在电动机控制中的应用实例
- 中级维修电工培训中的接线技巧
- 双电源自动切换开关工作原理接线图和操作规范
- 变频器调速控制典型接线方式
-
11个电路原理图+实物接线图,电工入门怎么能看不懂,纯干货!
对于电力作业人员而言,看懂电路图是基本的技能,熟练的掌握常见...
- 交流接触器接线图在电动机控制中的应用实例
- 中级维修电工培训中的接线技巧
- 变频器调速控制典型接线方式
- 电流保护接线方式
-
PLC | 西门子S7-1200系列PLC全套接线图,很实用!
西门子S7-1200是一款紧凑型、模块化的PLC,可完成简单...
- 不会PLC又如何?看懂这34个接线图,完胜99%的电工!
- 电动机运行监视系统梯形图及PLC接线图
- PLC与外接按钮开关接线方法图解
- PLC模拟量控制变频器硬件接线方法图解
-
双电源自动切换开关工作原理接线图和操作规范
双电源是指:一种由微处理器控制,用于电网系统中网电与网电或网...
- 瓦斯保护的原理接线
- 变频器调速控制典型接线方式
- 变频器控制接线方式的选择和应用
- 地区变电站的电气主接线
- 详细阅读
- 详细阅读
- 详细阅读
-
自耦变压器降压启动原理图详细阅读
这种降压启动方法是利用自耦变压器来降低加在鼠笼式异步电动机定子三相绕组上的电压从而达到限制定子绕组上过大的启动电流,其原理线路如下右图所示。它由三相自耦变压器和控制开关S1、S2和电动机M组成。启动时...
2023-01-24 454 自耦变压器
- 详细阅读
- 详细阅读
-
电动机间歇运行电路详细阅读
启动后,KT1得电开始延时,达到预置时间,KT1延时触点动作,常闭触点断开,KM失电复位;常开触点闭合使KT2得电开始延时,达到预置时间,KT2延时常闭触点断开,KT1失电复位。随后KT2也失电复位,...
2023-01-24 270 电动机
-
热过载保护器接线图详细阅读
97NO与98NO 是一组动合触点(常开)。一般用于指示灯回,以表示热保护动作了。95NC、 96NC 是一组动断触点(常闭)。一般用于接触器控制回路,过载时断开接触器。...
2023-01-24 816 接线图
- 详细阅读
-
三相异步电动机正反转工作动作原理图解详细阅读
在电气图纸的设计过程中,我们会经常遇到需要手动控制一台电机正转和反转工作的回路,下面为您介绍一下三相异步电动机正反转原理图以及工作原理。三相异步电动机正转的工作动作原理:QS开关合上后,按下SB2启动...
2023-01-24 237 电动机