不同系列交-直-交变频器内部的主体电路基本相同,变频调速过程中出现的许多现象,都可通过主体电路来进行分析。因此,熟悉主体电路的结构,透彻了解各部分的原理,具有十分重要的意义。一、 交直变换交-直变换电...
2023-07-21 198 变频器 电源 二极管 电容
错相和缺相保护在矿山采掘设备中有着极其广泛和重要的应用,如国产的WK-4、WK-10 挖掘机等设备均有错相和缺相保护电路。它避免了这些移动设备在重新接线过程中对设备损 害、减少了系统故障和电机烧...
2023-07-21 198 电动机 电路图 电工 电容
共基极放大电路 共基极的放大电路,如图1所示, 图1 共基极放大电路 主要应用在高频放大或振荡电路,其低输入阻抗及高输出阻抗的特性也可作阻抗匹配用。电路特性归纳如下: 输...
2023-07-21 186 三极管 电容
一阶电路暂态过程的求解方法 一阶电路 仅含一个储能元件或可等效为一个储能元件的线性电路 , 且由一阶微分方程描述,称为 一阶线性电路。 求解方法 1. 经典法 : 根据激励 ( 电源电压或电流...
2023-07-21 189 电源 电容
用电设备中,多数是电感性负载,本实验所用的日光灯电路就是一个电感性负载电路。一般电感性负载功率因素较低,通常用并联适当补偿电容器的方法来提高功率因素,并联电容后,由于电感性负载支路的感性电流与电容支路...
2023-07-21 497 电容 电容器 电源 电子
电阻在电路中的主要作用就是阻碍电流流过,应用于限流、分流、降压、分压、负载与电容配合作滤波器及阻匹配等.数字电路中功能有上拉电阻和下拉电阻。 电阻器在电路中用作分压器、分流器和负载电阻;它与电容器—起...
2023-07-21 250 电容 电容器 电源 节电
1无线充电器原理与结构 无线充电系统主要采用电磁感应原理,通过线圈进行能量耦合实现能量的传递。如图1所示,系统工作时输入端将交流市电经全桥整流电路变换成直流电,或用24V直流电端直接为系统供...
2023-07-21 175 电源 三极管 电容
为了实现电能或电信号的产生,传输,加工及利用,人们将所需的电器元件或设备,按一定方式联接起来而构成的集合称为电路。 ...
2023-07-21 164 电源 电子 电容 电路图
基本的电路元件可以分成两类:无源元件和有源元件。理想的无源元件 图1 无源元件图2a 电阻 图2b 电容图2c ...
2023-07-21 227 电容 电源 电路图
集电极馈电有两种形式,分别为串馈和并馈,分别如图1(a 、(b)所示。串馈是将电子器件、负载回路和电源三部分串联起来。并馈是将三部分并联起来,图中:LC是负载回路。LC是高频扼流圈,它对于直流可认为是...
2023-07-21 162 电子 电源 电容