在电子电路中(如晶体管放大器电路)我们常需要一些电压增益较大的放大器,为此常要将晶体管集电极的负载电阻设计得尽量大,但此电阻太大将容易使晶体管进入饱和状态,此时我们可利用晶体三极管来代替这个大电阻...
2023-10-21 108 电源电路 电路图
下图是用TTL逻辑电平控制的集成稳压电源。当TTL逻辑电平为高电平时,晶体管VT饱和,将电阻R2短接到地,输出电压 为1.25V。当逻辑电平为低电平时,晶体管VT截止,输出电压为:Uo=1.25(...
2023-10-21 113 电源电路 电路图
恒流亦可叫稳流,意思相近,一般可以不加区别。与恒压的概念相比,恒流的概念就难于理解一些了,因为日常生活中恒压源是多见的,蓄电池、干电池是直流恒压电源,而 220V 交流电,则可认为...
2023-10-21 99 电源电路 电路图
摩托车的电瓶充电器电路 工作原理:本电路工作稳定可靠,调节范围宽;不用大功率大电流可控硅,可对6V:24V任何电瓶充电,R6、C4使负载近似为阻性。R1:...
2023-10-21 120 电源电路 电路图
稳压二极管的特点就是击穿后,其两端的电压基本保持不变。 这样,当把稳压管接入电路以后,若由于电源电压发生波动,或其它原因造成电路中各点电压变动时,负载两端的电压将基本保持不变。 稳...
2023-10-21 91 电源电路 电路图
电感性负载 电感性负载可用电感L及电阻R来表示,如图1-6所示。 当晶闸管刚导通时,电感L中产生阻碍电流变化的感应电动势。由于电感中电流不能突变,它由零逐渐上升。当电流达最大值时,感应电动...
2023-10-21 126 电源电路 电路图
这种逆变器的基本电路,如图1-12所示。当触发信号交替地加到晶闸管SCR1和SCR2时。假定首先SCR1导通、SCR2关断。此时,电流将从电源十E经电抗器L1,变压器初级绕阻的上半臂及SCR1流...
2023-10-21 116 电源电路 电路图
上图是采用功率MOS管的精密线性稳压电源电路。电路中TI431为可调整准稳压三极管.当调节RP时,图中①端电压也随之改变.③端的稳压值为V3=(1+Rrp/R2 Vref。式中,Vref=2.5...
2023-10-21 118 电源电路 电路图
本文介绍的是晶体管作开关的电感储能器充电电路。晶体管基极加有宽度为t0,重复频率为f0的触发脉冲。在t0的作用器件,晶体管饱和导通,脉冲变压器变比为n,初级电感量为L1,次级电感量L2。初级电流i...
2023-10-21 121 电源电路 电路图
运放(operational amplifier)能对信号进行数学运算的放大电路。它曾是模拟计算机的基础部件,采用集成电路工艺制做的运算放大器,除保持了原有的很高的增益和输入阻抗的特点之外,还具...
2023-10-21 127 电源电路 电路图