直流电源,是维持电路中形成稳恒电流的装置。如干电池、蓄电池、直流发电机等。 来源:阴雨...
2023-10-21 100 电源电路 电路图
复位电路的应用对象一般是带有复位功能的集成电路。为确保微机系统中电路稳定可靠工作,复位电路是必不可少的一部分,复位电路的第一功能是上电复位。一般微机电路正常工作需要供电电源为5V±5%,即4.7...
2023-10-21 114 电源电路 电路图
下图是上海牌LY321型磁带录音机稳压电源电路图:采用多个二极管和三级管以及电容的整流滤波作用,达到稳定供电的要求。并且可在在电池和市电直接相互切换的作用。 ...
2023-10-21 107 电源电路 电路图
稳压电源(stabilized voltage supply)是能为负载提供稳定交流电源或直流电源的电子装置。包括交流稳压电源和直流稳压电源两大类。 常用的稳压电源有:①铁磁谐振式交流稳压器。由...
2023-10-21 96 电源电路 电路图
该器件的特点是: (1)工作电压范围宽(4.5-20V); (2)电压转换率高(空载时可达99.9%); (3)功率转换率高(可达96%); (4)外围元件少; (5)静态电流小(6V...
2023-10-21 158 电源电路 电路图
如图所示,该电动缝纫机空载节能器电路由控制开关Sl、灯开关S2及S4、交流接触器KM、脚踏开关S3、时间继电器KT和低压断路器QF组成。EL为照明灯,M为电动缝纫机电动机。 ...
2023-10-21 118 电源电路 电路图
当电压Us>3V时,晶体管T2导通,从而使T1也导通;而当Us<0.2V时T1,T2截止。实际中R1和R2的值同所选用的晶体管T1.T2以及工作电压有关。 在输入电压、负载、环境温度...
2023-10-21 122 电源电路 电路图
DC-Servo的并联稳压供电电路原理 如图为DC-Servo的并联稳压供电电路,其最大的特点就是:供电稳定,损能少。 来源:阴雨...
2023-10-21 95 电源电路 电路图
工作原理:如下图所示,这种电路又称为升降压式开关电源。无论开关管VT1之前的脉动直流电压高于或低于输出端的稳定电压,电路均能正常工作。 当开关管 VT1 导通时,电感L 储存能量,二极管VD1...
2023-10-21 165 电源电路 电路图
Boost电路结构主电路如图所示。图中S1,S2,S3为全控型器件,D1及D2为不控型器件。负载依然为有源负载,直流输入端串联电感。S1,S2,S3的控制采用PWM控制,此电路的元...
2023-10-21 126 电源电路 电路图