一种功率晶体管芯片小单元和双极型NPN功率晶体管芯片,该功率晶体管芯片小单元的特征在于:其包括基区、发射区及集电区,发射区和集电区为N型,基区为P型,且集电区与基区之间的集电结是平面与弯曲面的结...
2023-10-21 113 电源电路 电路图
工作原理:单端正激式开关电源的典型电路如图一所示。这种电路在形式上与单端反激式电路相似,但工作情形不同。当开关管VT1导通时,VD2也 导通,这时电网向负载传送能量,滤波电感L储存能量;当开关管V...
变换器,是将信源发出的信息按一定的目的进行变换。矩阵式变换器是一种新型的交-交电源变换器。和传统的变换器相比,它具有如下优点:不需要中间直流储能环节;能够四象限运行;具有优良的输入电流波形和输出电...
2023-10-21 118 电源电路 电路图
传感器音频或光电平连接到J1,通过IC1-a和IC1-b(整流)放大,用于触发IC2。R12设定触发和闪光灯之间的延时。IC1-c驱动指示灯LED2,并触发SCR1,关闭频闪连接到J2。光电池或麦克风...
2023-10-21 126 电源电路 电路图
UC3842 采用固定工作频率脉冲宽度可控调制方式,共有8 个引脚,各脚功能如下:①脚是误差放大器的输出端,外接阻容元件用于改善误差放大器的增益和频率特性;②脚是反馈电压输入端,此脚电压与误差放大器同...
2023-10-21 177 电源电路 电路图
单结晶体管单结晶体管(简称UJT)又称基极二极管,它是一种只有一个PN结和两个电阻接触电极的半导体器件,它的基片为条状的高阻N型硅片,两端分别用欧姆接触引出两个基极b1和b2。在硅片中间略偏b2一...
2023-10-21 107 电源电路 电路图
AD586内含一个齐纳二极管电压基准源、一个输出缓冲放大器及若干高稳定薄膜电阻。这样的设计使得5V输出单片高精度基准源的初始值偏差小于2mV。由于齐纳二极管的输出端使用了偏移补偿电阻和同相输入放大...
2023-10-21 119 电源电路 电路图
下图所示为2节电池升压到3.3V、5V、12V的DC-DC变换器电路图。其中Vin和SW接高频扼流圈(其线圈有的绕在铁氧体芯上,有的是空心的,匝数为几百或几十,自感系数为几毫亨。这种扼流圈只对高频...
2023-10-21 128 电源电路 电路图
SG3524内部结构框图与管脚配置图 目前,开关电源越来越广泛地应用于各行各业中,是各种用电设备的重要组成部分。在开关电源的设计过程中,常常使用各种PWM的IC。 SG3524是定频PWM电路...
2023-10-21 194 电源电路 电路图
电压源,即理想电压源,是从实际电源抽象出来的一种模型,在其两端总能保持一定的电压而不论流过的电流为多少。电压源具有两个基本的性质:第一,它的端电压定值U或是一定的时间函数U(t 与流过的电流无关。...
2023-10-21 120 电源电路 电路图