如图为跟踪式稳压电源电路。其采用LM317和LM337三端可调集成稳压器,内部有限流、短路和热保护等完善功能。 其独特之处:仅用一个单连电位器即能实现正、负电压“同步”调节,具有线路简单、调节...
2023-10-21 109 电源电路 电路图
下图所示为具有保护功能的可调电源电路图。其中电压电路由C2、R2、VD5组成的启动电路,R4、RP构成取样电路,VD6、VD7、R4构成的基准电路,VT3、VT1、VT5构成的比较放大电路,VT1、V...
2023-10-21 104 电源电路 电路图
如图所示是采用?A78S40构成的升压电路,输入电压为5V,输出电压为15V,输出电流为150mA,纹波电压为25mV以下,满负载时效率为80%,可改变R1与R2调节输出电压。&nb...
2023-10-21 130 电源电路 电路图
一块集成电路芯片,包括一硅基板、至少一电路、一固定封环、一接地环及至少一防护环。 电路形成于硅基板上,电路具有至少一输出/输入垫。固定封环形成于硅基板上,并围绕电路及输出/...
2023-10-21 133 电源电路 电路图
在实际生产应用中,在许多场合都要求有长期稳定的高压直流电源,并且有时希望输出电压是可凋的。-般的稳压电路很难达到这样的要求,即使做到,其输出的动态范围也不高。笔者在一次设计中,将一般稳压电路中引入...
2023-10-21 98 电源电路 电路图
T1是一个60赫兹的120伏到1000伏升压变压器。C1, C2, C3, C4, D2通过D5形成一个四倍电压。最初的电压是4到5千伏,当激光管发光时电压下降。 来源:zhen...
2023-10-21 126 电源电路 电路图
该高压电源可以使日光灯在12V电压下工作,即使该灯管的灯丝有缺陷。本质上它是个用于激励自制自偶变压器的振荡器。T1层绕在一根直径5/16、长17/8的铁氧体磁棒上。S2是一种选择性的灯丝开关。&nbs...
2023-10-21 125 电源电路 电路图
单稳态电路只有一个稳定状态,触发翻转后经过一段时间会回到原来的稳定状态,一般作固定脉冲宽度整形。 来源:LIDY...
2023-10-21 119 电源电路 电路图
振荡器电路使用外部定时元件Rt和Ct.一内部二分频电路防止脉冲占空比大于50%,这样就避免了变压器磁饱和。通过改变Vcc注入Rt的电流,很容易改变变换器的工作频率;10脚为同步端。SYNC输...
2023-10-21 123 电源电路 电路图
限幅电路是按在限定的范围削平信号电压波幅的电路,限幅电路常用于:①整形,如削去输出波形顶部或底部的干扰;②波形变换,如将输出信号中的正脉冲削去,只留下其中的负脉冲;③过压保护,如强的输出信号或干扰有可...
2023-10-21 121 电源电路 电路图