为提高功率,电路使用电压转换器LM3350MM替代常用倍压电路。900KHZ的充电泵按两个相对电容C1和C2进行切换,以使输出端VH产生3/2*Vbt电压。VD1为肖特基二极管,在启动过程中,通过...
2023-10-21 106 电源电路 电路图
该电路采用精密钳位电路构成超低频振荡器,它基本上是一个标准的无稳态多谐振荡钳位电路A3、A4的参考电压V1和V2是由参考电压源μA723供给。0V-15V可调直流稳压电源电路可采用...
2023-10-21 136 电源电路 电路图
CW7800的稳压集成块是使用串联稳压的原理,集成电路的输入与输出端的压差V△将随着输入电压的变化而变化,以保证输出电压不变化。二极管稳压的原理不同,它实际上是并联稳压,将自己并联在负载两端。使...
2023-10-21 110 电源电路 电路图
该三倍器常用于低电流、高电压的应用中。电容器可以是0.001μF、3千伏到6千伏的磁盘,也可以是单位为3千伏的二极管,或者是三个串联的IN4007。 来源:ruanjuqings...
2023-10-21 113 电源电路 电路图
开关电源是利用现代电力电子技术,控制开关管开通和关断的时间比率,维持稳定输出电压的一种电源,开关电源一般由脉冲宽度调制(PWM)控制IC和MOSFET构成。开关电源和线性电源相比,二者的成本都随着...
2023-10-21 118 电源电路 电路图
由CW137组成的集成稳压电源电路如图所示。集成化稳压电源采用集成工艺,将调整管、基准电压、取样电路、误差放大和保护电路等集成在一块芯片上。 集成稳压电源就是稳压电源的集成化,它具有体积小、可...
2023-10-21 121 电源电路 电路图
CW3525A设计的车载逆变器电路原理 CW3525A设计的车载逆变器电路特点:(1)采用脉宽调制式开关电源电路,转换效率高达90%以上,自身功耗小;(2)输出交流电压220V,并且具有稳压功能...
2023-10-21 120 电源电路 电路图
正激型变换器电路图 当S断开时,N1能量转移到N3,经N3-电源-VD3向输入端释放能量,避免变压器过饱和。VD1用于整流,VD2用于S断开期间续流。当S导通时,原边经过输入电源-N1-S-输入...
2023-10-21 123 电源电路 电路图
如图为开关式稳压器电路。开关式稳压电路具有体积小、效率高的特点。线性电源的效率为30%~55%,而开关稳压器可达60%~85%,而且可以省去工频变压器和巨大的散热器,体积和重量都大为减小。&nb...
2023-10-21 107 电源电路 电路图
dc dc升压电路原理 如图为dc dc升压电路,其工作原理:稳态情况下,T断开时, 电感电流减少,uL=US - uC <0 uC =US - uL > US。升压变换电路IGBT...
2023-10-21 134 电源电路 电路图