本电路在电容器上串联一个二极管,则电容器将充电至交流周期的峰值。在更高的脉冲到来之前,使电容器去耦,脉冲的重复出现,将逐渐增加对C充电。 来源:阴...
2023-10-21 113 电源电路 电路图
记忆延迟电路由时基集成电路IC和它的外围元件C3、R、VD5组成。开关控制器由继电器K和它的常闭节点和三孔插座XS组成。 接通电源后,12V直流经过电阻R向电容C3充电,由于充电需要一定的时间,...
2023-10-21 141 电源电路 电路图
铅酸电池过充保护器,可作为2-30Ah容量的中、小号铅酸电池在浮充状态下避免过充之用。当充电压升到14V左右时,晶体管Q1开始导通对电池进行分流,以防电池液损耗,有利于散热。图中Q1为2N305...
2023-10-21 105 电源电路 电路图
该电路显示了一些用于低压,串联,功率高条件下的技术。其目的是输出10mA以上的电流,待机电流大约是100μA。当输出电压的范围很广时该电路很容易被编程。 来源:zhenglili...
2023-10-21 138 电源电路 电路图
显示器是属于电脑的I/O设备,即输入输出设备。它可以分为CRT、LCD等多种。它是一种将一定的电子文件通过特定的传输设备显示到屏幕上再反射到人眼的显示工具。 来...
2023-10-21 101 电源电路 电路图
变频器是利用电力半导体器件的通断作用将工频电源变换为另一频率的电能控制装置。随着现代电力电子技术和微电子技术的迅猛发展,高压大功率变频调速装置不断地成熟起来,原来一直难于解决的高压问题,近年来通...
2023-10-21 100 电源电路 电路图
吸收回路由电容电阻二极管 等组成;其功能是吸收因开关变压器T原方(初级)绕组自感电势,避免在开关管集电极截止瞬间出现过高的反峰高电压损坏开关管而设立的。 我们知道开关管工作的时候一直是导通、截止...
2023-10-21 143 电源电路 电路图
IC901有两个保护电路:①过压保护,当由电压超过11V时,内部电路自动关闭,避免输出电压过高或市电电压过高造成的损害;②过流保护,IC901内部有热敏器件,当器件温度超过150℃时,热保护电路...
2023-10-21 111 电源电路 电路图
(a)所示为单开关模块; (b)所示为两单元(半桥)模块; (c)所示为H桥(单相桥)模块; (d)所示为不对称H桥模块; (e)所示为三相桥(六单元或逆变桥)模块; (f)所示为斩波...
2023-10-21 106 电源电路 电路图